Creating a bootable macOS USB drive from a DMG file on a Windows PC can be done using a few different methods. Here’s a step-by-step guide using the common method of using TransMac, a popular software for handling macOS files on Windows.

Method 1: Using TransMac

Requirements:

• A USB drive with at least 16GB capacity
• The DMG file you want to create a bootable USB from
• TransMac (a software that allows you to read Mac files on a Windows PC)

Steps:

1. Download and Install TransMac:
   • Visit the TransMac website and download the software.
   • Install TransMac on your Windows PC. Note that the software offers a 15-day trial period.
2. Prepare Your USB Drive:
   • Insert your USB drive into the Windows PC.
   • Open TransMac with administrative privileges (right-click the TransMac icon and select “Run as administrator”).
   • In TransMac, find your USB drive in the left-hand column.
3. Format the USB Drive (Optional but recommended):
   • Right-click on the USB drive in TransMac.
   • Select “Format Disk for Mac” and confirm. This will erase all data on the USB drive, so make sure you have backed up any important files.
4. Restore the DMG File to USB:
   • Right-click the USB drive in TransMac again.
   • Select “Restore with Disk Image.”
   • In the dialog box that appears, browse to the location of your DMG file and select it.
   • Confirm the restoration. This process may take some time depending on the size of the DMG file and the speed of your USB drive.
5. Eject the USB Drive:
   • Once the restoration process is complete, right-click on the USB drive in TransMac and select “Eject.”
6. Boot from the USB Drive on a Mac:
   • Insert the USB drive into the Mac.
   • Restart the Mac and hold down the Option (⌥) key during boot.
   • Select the USB drive from the list of bootable devices.

Method 2: Using UUByte DMG Editor

Another tool you can use is UUByte DMG Editor, which is also designed to create bootable macOS USB drives on a Windows PC.

Steps:

1. Download and Install UUByte DMG Editor:
   • Visit the UUByte DMG Editor website and download the software.
   • Install UUByte DMG Editor on your Windows PC.
2. Launch UUByte DMG Editor:
   • Open the software and insert your USB drive into the PC.
3. Burn DMG to USB:
   • In UUByte DMG Editor, select the “Burn” option.
   • Browse for the DMG file and select your USB drive as the destination.
   • Click the “Burn” button to start the process. This will format the USB drive and burn the DMG file to it.
4. Boot from the USB Drive on a Mac:
   • Insert the USB drive into the Mac.
   • Restart the Mac and hold down the Option (⌥) key during boot.
   • Select the USB drive from the list of bootable devices.

By following these steps, you should be able to create a bootable macOS USB drive from a DMG file using a Windows PC.

Things you need :

1. A PC/Laptop.

2. The device you wish to root.

3. An original Samsung cable

Before starting you should :
– UNLOCK THE BOOTLOADER.
1. Remove all accounts from the device to ensure security features don’t mess our root installation.
2. Turn on usb debugging. If you do not know how to do that, check here.
3. Download Samsung drivers to ensure the device is well connected.
4. This is a tedious process so i suggest charging your device until full.

1. Installing the firmware.
There is a forum for this. Click here.

If you want to use SamMobile to get the firmware : (you do need to sign up)
1. Go to Settings > About Device/Tablet > Software Info and note down the baseband version. This will be required for getting the firmware file.
2. While in Software Information, search for “service provider software version” and check the last 3 letters (Device Reigon). Example : XSA.

2. Extracting the MD5 File.
1. First you must download 7-zip to extract the md5 file. You may use other tools.
2. Then you must extract the files using 7-zip or the software you chose.
3. Next, extract only the files which start with a AP, BL, CSC and HOME. (This will take a while depending on the write speed of your storage.)\
4. Now transfer the AP file to your device. Make sure to put it downloads on your device for easy access.

3. Patching AP file with Magisk.
1. Now, download the Magisk manager apk.
2. Open the app and click install which is next to Magisk.
3. Click Select and Patch a File and select the AP file.
4. After patching, you should transfer the patched AP file (its usually renamed to Magisk Patched or something.) to the pc.

4. Flashing the patched AP file onto the device.
1. After the previous steps, make sure your device is in download mode and connected to your computer.
2. Now, download and open the latest version of Odin.
3. Go to Options and Disable Auto Reboot.
4. Click the AP button and choose the patched magisk file.
5. As we added the AP file, add the default. (BL, CSC and HOME)
6. Click Start.

5. Final steps
1. As soon as it finishes, exit out of download mode and immediately boot into recovery mode.
2. Use the volume buttons to go down to Wipe Data and Factory Reset.
3. Click the power button and confirm. After this, go back to reboot now and click the power button.

Once you finish the setup, go to the home drawer and check if the magisk app is there.
If not, shut down the device and turn it on again.

step-by-step tutorial on how to burn an ISO file to a USB drive:

1. Download and Install Required Software: You’ll need software that allows you to write ISO images to USB drives. A popular choice is a tool called Rufus, which is available for free. You can download Rufus from its official website: https://rufus.ie/
2. Insert USB Drive: Insert the USB drive into an available USB port on your computer. Make sure it’s large enough to accommodate the ISO file you want to burn.
3. Launch Rufus: Once you have Rufus downloaded and installed, launch the application.
4. Select USB Drive: Rufus should automatically detect the USB drive you inserted. If it doesn’t, make sure the correct drive is selected under the “Device” dropdown menu.
5. Select ISO File: Click on the “Select” button next to the “Boot selection” section. Navigate to the location where your ISO file is stored and select it.
6. Configure Settings (Optional): Rufus offers various options that you can configure according to your needs. These options include partition scheme, file system, cluster size, etc. For most cases, leaving the default settings should work fine. However, if you’re not sure, you can consult the documentation or leave them as they are.
7. Start the Process: Once you’ve selected the ISO file and configured any necessary settings, click on the “Start” button. You might see a warning indicating that all data on the USB drive will be erased. Confirm that you’re okay with this, and Rufus will begin the process of burning the ISO file to the USB drive.
8. Wait for Completion: Rufus will take some time to write the ISO file to the USB drive. The duration can vary depending on the size of the ISO file and the speed of your USB drive. You’ll see a progress bar indicating the status of the process. Once it’s complete, you’ll see a “READY” status in Rufus.
9. Eject USB Drive: Once Rufus has finished burning the ISO file to the USB drive, you can safely eject the USB drive from your computer.

That’s it! You’ve successfully burned the ISO file to the USB drive, and you can now use it to boot your computer or perform any other actions the ISO file is intended for.

• Ouvrez l’application Téléphone sur votre téléphone Android.
• Tapez *#*#4636#*#* sur le clavier téléphonique pour accéder à un menu caché « Mode Service » où vous recevrez des informations sur l’état de la batterie de votre appareil, les informations sur le réseau et les statistiques d’utilisation.
• Ensuite, appuyez sur l’option « Informations sur la batterie » et vérifiez l’état de la batterie de votre appareil.

Ce code secret fonctionne sur la plupart des téléphones basés sur Android, y compris les téléphones basés sur Xiaomi, les téléphones basés sur Google et les téléphones basés sur OnePlus, mais il ne sera pas disponible pour les appareils Samsung car Samsung possède son propre code de vérification de l’état de la batterie Samsung : *0228# .

Drawing File

Version: 23.11.04

Size: 15.6MBhttps://drive.google.com/file/d/1khQKmlnZ-8Z5ABOunLf_6XJSxZCJ3YXa/view?usp=sharing

Date: 2023/11/07

download

LINK2

chek link

Octoplus/Octopus Box LG Software version 3.1.8 is out!

Octoplus/Octopus Box LG Software v.3.1.8 Release Notes:

If it’s the Tencent version, then no, there no way to change to other language other than Chinese i’m afraid. But you i can still buy and play english games

From what I have heard, it’s basically a censored version of normal switch. That mean you can’t use ANYTHING outside the great firewall, I would advice you not to get it.

I currently have the same problem. Is there anyway to change the system or reflash it to a different country.

I brought my nintendo from the official nintendo store on Taobao. After receiving the unit i quickly found out that i could not change the system language.

I then contacted customer support for an alternative or to return the unit but they refuse to help me under the policy that because i opened the box the unit cannot be returned.

Therefore, i am currently stuck with a nintendo switch that cannot change language, cannot access the global estores or play multiplayer with people outside of china (apparently).

NEW REPAIR TOOL… MECHANIC T-824 USB-C CHARGING PORT TESTER

NEW REPAIR TOOL… MECHANIC T-824 USB-C CHARGING PORT TESTER

NEW REPAIR TOOL… MECHANIC T-824 USB-C CHARGING PORT TESTER